LINKSYS AP1300 - Access Point

• Supports AC1300 dual-band 802.11ac
• In-wall (wall plate) mount
• 802.3af PoE and 802.3at PoE+-compliant 
• 802.3af PoE Passthrough (requires 802.3at PoE+ input)
• WPA2™ and WPA2 Enterprise
• Centralized cloud management feature
• Customizable Captive Portal feature
• Zero Touch Provisioning support
• 802.11k/r Seamless roaming
• Bandwidth limit per SSID and per client
• VLAN Tagging feature
• Built-in DHCP server
• 2x2 Spatial streams
• Beamforming support
• Supports up to eight SSIDs for each band (16 in total)
• Supports Client Isolation feature
• Linksys Cloud Manager 2.0
• 5-year warranty

Hardware

• Weight: 363 g
• Dimensions: 140 mm x 90 mm x 40 mm
• Four internal antennas
• One status indicator light
• One Reset pinhole located at the back panel. Press and hold this button for 20 seconds to reset to factory default settings. The indicator light will flash red once it has been reset.
• A Power port found at the bottom. This is an optional port to supply power using an AC power adapter (not included in packaging).  However, you will need a 12V, 1A power adapter with a barrel jack length of 9.5 mm, outer diameter of 5.5 mm, and inner diameter of 2.1 mm.
• Three ethernet ports: